Xiao Bian today to tell you about the electronic scales 5 display problems and solutions, with the use of electronic scales more and more people, there are many problems. The following Xiao Bian gave everyone a detailed explanation of this issue, hoping to help everyone.
1. The figure displayed on the display is not stable when weighing electronically.
Solution: First check whether the electronic scale is placed on the horizontal plane and whether the four scales are leveled, and re-adjust the position of the electronic scale and scale.
Second, when the electronic floor scale is turned on, the display shows numbers and there is no regular jump.
Solution: This situation is often due to the water vapor in the electronic junction box is too heavy or water. It should quickly disassemble the junction box to detect whether the water and dry with a hair dryer.
Third, the weight of electronic scales is usually light or heavy after normal power on.
Solution: At this time, it needs to be recalibrated according to the instruction manual. If the scale problem after the calibration is still not resolved, it can basically be confirmed as the cause of damage to the electronic scale sensor.
4. After the electronic scales are weighed, the display will not return to zero after the weighing object is removed.
Solution: The above situation should be that the signal is attenuated due to the line breakage. Look carefully at the electronic scale data line for damage. If so, replace it promptly.
5. After the power is turned on, the electronic scale display does not respond.
Solution: Carefully check that the power cable is in good condition and the monitor cable is in good condition. Replace it immediately if it is damaged. If the line connection is no problem, then you can only think of the monitor motherboard or hardware problems, this time only contact the manufacturer to return the factory maintenance.
This article by the Shanghai Heng Heng Electronic Technology Co., Ltd. to share, if you want to learn more about electronic scales, please contact us for information, thank you for your great support!

NIKKO Starter: S6D95, S4D95, 6D155, S6D102, DA220, S6D105


POINTS TO ATTENTION:

1- Keep a careful check on gear ring before installation, replace one if damages.

2-Installed surface of both motor and generator should be kept clean, Make sure the strength to the bolts.

3- Clean each connection port, Strictly observed the sketch, Make sure of firm connection and tight electric conduction.

4- Check if the key could be automatic


NIKKO Starter

NIKKO Starter, NIKKO Starter Motor, NIKKO Starter Parts, NIKKO Auto Parts

NINGBO ZHONGWANG AUTO FITTINGS CO.,LTD , http://www.autostarter-alternator.com