The main purpose of poultry chilling is to suppress the development of pathogenic microorganism and spoilage microorganism. Many researches show that the two microorganisms on the surface of carcass are largely reduced after chilling process. There are two main chilling method: water chilling and Air Chilling. At first, people tend to adopt air chilling in the chicken plucking process, instead of immersed chilling and drum-type chilling, for the consideration of chilling speed. While the modern research data doesn't support this point, and it shows that the chilling speed may affect the flavor, quality and appearance of meat, and shock chilling will cut down the meat quality, and slow chilling will cause PSE meat.
in Water chilling area, it contains water screw chiller, and water cooling units(water cooling system or Ice Flaker).for wather cooling units,it is for lower the temperature of water in the Screw Chilling, so that when pre-chilling the chickens, it can keep chickens in low temperautre(4-10°C),but different water cooling units have different effect.
also you can choose CONNECT Air chilling line. It is in one room,like a cold room. one automatic conveyor line is moving from outside to another side.and in this room,it is equiped with cold room equipment.
Screw Chilling, Air Chilling, Chicken Water Pre-Chilling, Chicken Air Chilling Connect Group For Poultry Project , https://www.connectpoultry.com
Product No
Stroke Max
Tube Length
L(mm)
Piston Rod Diameter
Tube Diameter
F1(N)Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
End Of Rod
End Of Tube
YQ02
180
280
460
10
22
180~800
M8/9
M8/8.5
Technical Requirements:
1.Our gas spring according to the standard of GB/T 25751-2010;GB/T 25750-2010 or produce by customers' requirements.
2.Cylinder:20#, black paint on surface, smooth coating, no grinning, no aberration.
3.Piston rod:45#,the surface is treated by chemical deposition for Ni- P alloy,72h salt spray resistance
4.The gas spring have no block and abnormal sound during working.
Â
Production Flow:
1.Tube Cutting 2.Welding 3.Riveting 4.Internal Parts Assemble 5.Air Inflating 6.Paint 7.Aging 8.Finished Gas Spring Assemble and Inspect 9.Packing
Test Machine:
Our Services:
Factory Certificate and pictures
-IATF16949Â Certificate;
-ISO 14001:2004Â Certificate;
-TUV
Test Report for Products
-Test Report for force ;Â
-Salt Spray test;Â
-High and low temperature test;
-Test Report for life cycle;
Lead TimeÂ
-Samples: 3-5days (Provide Free Samples);
-First Order: 15-30days ;
-Repeat Order: 15-25days;
Guarantee PeriodÂ
-3 years;
OEM  orders are welcomed.Â
We will develop and design per your orders.
FAQ:
1.Q: You are factory or trade company?
  A: Factory
2.Q: Can you do custom-made?
  A: Yes, just feel easy to tell me your request.
3.Q: Which colors are available?
  A: Gas springs are normally painted a neutral black.
4.Q: What is the delivery time for brochure or catalogue models?
  A: Usually be delivered within one week from receipt of order.
5.Q: What length tolerances are typical?
  A: This depends on the gas spring model, but typically it is +/- 2mm.
6.Q: What forces are available?
  A: Depending on the model, normally between 30N and more than 1000N.
7.Q: What kind of end fittings are available?
  A: Depending on the application, a variety of end fittings are available such as plastic or metal fittings for ball joint fittings
8.Q: :What information is necessary for designing a gas spring?
  A: Contact us directly.
Â
Product No
Stroke Max
Tube Length
L(mm)
Piston Rod Diameter
Tube Diameter
F1(N)Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
End Of Rod
End Of Tube
YQ02
180
280
460
10
22
180~800
M8/9
M8/8.5
Technical Requirements:
1.Our gas spring according to the standard of GB/T 25751-2010;GB/T 25750-2010 or produce by customers' requirements.
2.Cylinder:20#, black paint on surface, smooth coating, no grinning, no aberration.
3.Piston rod:45#,the surface is treated by chemical deposition for Ni- P alloy,72h salt spray resistance
4.The gas spring have no block and abnormal sound during working.
Â
Production Flow:
1.Tube Cutting 2.Welding 3.Riveting 4.Internal Parts Assemble 5.Air Inflating 6.Paint 7.Aging 8.Finished Gas Spring Assemble and Inspect 9.Packing
Test Machine:
Our Services:
Factory Certificate and pictures
-IATF16949Â Certificate;
-ISO 14001:2004Â Certificate;
-TUV
Test Report for Products
-Test Report for force ;Â
-Salt Spray test;Â
-High and low temperature test;
-Test Report for life cycle;
Lead TimeÂ
-Samples: 3-5days (Provide Free Samples);
-First Order: 15-30days ;
-Repeat Order: 15-25days;
Guarantee PeriodÂ
-3 years;
OEM  orders are welcomed.Â
We will develop and design per your orders.
FAQ:
1.Q: You are factory or trade company?
  A: Factory
2.Q: Can you do custom-made?
  A: Yes, just feel easy to tell me your request.
3.Q: Which colors are available?
  A: Gas springs are normally painted a neutral black.
4.Q: What is the delivery time for brochure or catalogue models?
  A: Usually be delivered within one week from receipt of order.
5.Q: What length tolerances are typical?
  A: This depends on the gas spring model, but typically it is +/- 2mm.
6.Q: What forces are available?
  A: Depending on the model, normally between 30N and more than 1000N.
7.Q: What kind of end fittings are available?
  A: Depending on the application, a variety of end fittings are available such as plastic or metal fittings for ball joint fittings
8.Q: :What information is necessary for designing a gas spring?
  A: Contact us directly.
Â
Model NO.: YQ02
Paint: Balck
Experience: 27 Years
Gas Type: Nitrogen Gas
Size: Can Be Customized
Piston Rod Treatment: Qpq
Trademark: CGS
Transport Package: Carton
Specification: 40.5*19*30.5cm
Origin: Changzhou, China
HS Code: 8479899990
Model NO.: YQ02
Paint: Balck
Experience: 27 Years
Gas Type: Nitrogen Gas
Size: Can Be Customized
Piston Rod Treatment: Qpq
Trademark: CGS
Transport Package: Carton
Specification: 40.5*19*30.5cm
Origin: Changzhou, China
HS Code: 8479899990