argon Pressure Regulator/Reducing Valve With Flowmeter Max inlet pressure (bar) Max.outlet pressure (bar) Nominal Flowrate (L/min) 1-10/1-15 G5/8"-RH(Male) Nasl oxygen cannula/mask 1-10/1-15 G5/8"-RH(Female) 1-10/1-15 W21.8"-RH(Female) G5/8"-RH(Male) G5/8"-RH(Male) W21.8"-RH(Female) W21.8"-RH(Male ) G5/8"-RH(Male) CGA540-RH(Female) W21.8"-RH(Female) G5/8"-RH(Female) G5/8"-RH(Female) PZ19.2,PZ27.8 1-10/1-15  argon Pressure Regulator/Reducing Valve With Flowmeter Max inlet pressure (bar) Max.outlet pressure (bar) Nominal Flowrate (L/min) 1-10/1-15 G5/8"-RH(Male) Nasl oxygen cannula/mask 1-10/1-15 G5/8"-RH(Female) 1-10/1-15 W21.8"-RH(Female) G5/8"-RH(Male) G5/8"-RH(Male) W21.8"-RH(Female) W21.8"-RH(Male ) G5/8"-RH(Male) CGA540-RH(Female) W21.8"-RH(Female) G5/8"-RH(Female) G5/8"-RH(Female) PZ19.2,PZ27.8 1-10/1-15
Tractor, Head Tow Truck, Front drive capability called the front tractor, rear no traction drive capability of the car called the trailer, tractor trailer is pulled along. Tractor and trailer is connected in two ways: The first is the front half of the trailer after the tractor ride in the section above the saddle traction, tractor trailer behind the bridge to withstand the weight of the part, which is the tractor; second species is the front end of the trailer attached to the rear end of the tractor, the tractor only pull forward, dragging the trailer to go, but do not bear the weight of the trailer down, which is all linked.
Tractor, Head Tow Truck principle
Tractor, Head Tow Truck Traction Control System Traction Control System, referred to as TCS, also known as ASR or TRC. Its role is to make the car under various traveling conditions can get the best traction. Traction control system control device is a computer, the computer detects the use of four wheel speed and steering angle of the steering wheel when the car is accelerating, if it detects that the drive wheel and non-driving wheel speed difference is too large, the computer immediately determine the driving force is too large issuing a command signal to reduce the amount of oil the engine, reducing the driving force, thereby reducing the driving wheel slip rate. Computer control through the steering wheel steering angle sensor driver intent, then use the left and right wheel speed sensor detects the left and right wheel speed difference; in order to determine whether the degree of steering the car and the driver's steering intention of the same. If the car detects understeer (or oversteer), the computer immediately determine the driving force of the drive wheel is too large, it issued a directive to reduce the driving force, in order to achieve the driver's steering intention.
Tractor, Head Tow Truck Traction control system to prevent the vehicle driving on snow and other slippery surfaces the driving wheel idling, the vehicle can smoothly start and accelerate. Especially in snow or muddy road, traction control system can ensure the smooth acceleration, to prevent the vehicle wheel slip occurs due to sliding or drift.
Head Truck Tractor,Tractor Head Trucks,Head Truck Trailer CLW GROUP TRUCK , http://www.clwgrouptruck.net
           1.  Product Show               
                                                                    Â
           2.  Product Description              Â
Â
Moder No.
Service MediumÂ
Inlet Thread connect valve
Outlet ConnectionÂ
YQY740LA
O2
150
2-3
YQY740LA1
O2
150
2-3
YQY740LA2
O2
150
2-3
YQY740LA3
O2
150
2-3
1-10/1-15
YQY740LB
O2
150
2-3
1-10/1-15
YQY740LIR
O2
150
2-3
1-10/1-15
YQY740LC
O2
150
2-3
1-10/1-15
YQY740LB2
O2
150
2-3
1-10/1-15
YQY740LD
O2
150
2-3
1-10/1-15
YQY740LE
O2
150
2-3
1-10/1-15
YQY740LF
O2
150
2-3
1-10/1-15
YQY740LH
O2
150
2-3
2-15
YQY740L-ALL IN
O2
150
2-3
0-8/0-15/0-25
diss/barb
Â
YQY740-870
O2
150
2-3
0-8/0-15/0-25
CGA870
YQY740-870L
O2
150
2-3
0-8/0-15/0-25
CGA870
YQY740W1
O2
150
2-3
1-10/1-15
hospital oxygen wall system
YQY740W2
O2
150
2-3
1-10/1-15
YQY740W3
O2
150
2-3
                                                                    
Â
                                                                    Â
              4.  Our Services             Â
1.OEMÂ Accepted
A:Carve simple LOGO for you on cylinder shoulder by free.
B:Write shipping mark on outer packing carton according to your requirement.
C:Spray simple English letters, for example "Gas" ,"O2 Medical", and make water proof PVC label or sticker, colorful box, barcode ...etc.. according to your design.
2. Professional service
A: 24 hours on-line every day.
B: Quick reply your email and answer your questions.
C: Kind communication,  Careful attitude,Good patience,Professional product knowledge.
3.Good after-sales team
A:If there is any problem with the use of our product within two years, we can replace it for you a new product.Specific questions can contact customer service department
B:We also give some good advice to customers about there market.
C:Any questions about the product, We will contact the technical department in time to deal with the problem.
D.The quality supervision department may provide professional quality inspection certificates,test report of water pressure, air tightness, etc.
4.Deliver on time
Our delivery date is usually 25-30 days. We will send the goods to you on time according to the contract stipulation.
                                                                    Â
            5.  FAQ            Â
1. Can I do OEM in your factory?
 Yes, We provide OEM service to our customer.
2. What kind of certifications do you have for your products?
 We can offer CE, CB, RoHS, CCC,GS,UL,SAA.Others if our customer want it, we will get it.
3.What is the capacity of Soda Maker Cylinder?
Our capacity of Home Soda Maker Co2 cylinder is generally 0.6L. We can also supply the design and cylinder for your non-standard size.
4.Can you filling co2 gas into the 0.6L Co2 cylinder and what about the weight?
Yes! We can able to fill food grade co2 gas in the refilled co2 aluminum cylinder, and the price is very good. gas weight is about 360g-420g.
5.What about the working pressure?
It is about 150bar, we also have non-standard pressure.
6.What about the delivery time?
It generally will take us 25-30 days to finish the order.
                                                                    Â
             6.  Contact Me             Â
If you have any questions, or want to know more about the product information, you can contact me directly.
You can also direct access to our Web Query:http://shbene.en.made-in-china.com/
           1.  Product Show              Â
                                                                    Â
           2.  Product Description              Â
Â
Moder No.
Service MediumÂ
Inlet Thread connect valve
Outlet ConnectionÂ
YQY740LA
O2
150
2-3
YQY740LA1
O2
150
2-3
YQY740LA2
O2
150
2-3
YQY740LA3
O2
150
2-3
1-10/1-15
YQY740LB
O2
150
2-3
1-10/1-15
YQY740LIR
O2
150
2-3
1-10/1-15
YQY740LC
O2
150
2-3
1-10/1-15
YQY740LB2
O2
150
2-3
1-10/1-15
YQY740LD
O2
150
2-3
1-10/1-15
YQY740LE
O2
150
2-3
1-10/1-15
YQY740LF
O2
150
2-3
1-10/1-15
YQY740LH
O2
150
2-3
2-15
YQY740L-ALL IN
O2
150
2-3
0-8/0-15/0-25
diss/barb
Â
YQY740-870
O2
150
2-3
0-8/0-15/0-25
CGA870
YQY740-870L
O2
150
2-3
0-8/0-15/0-25
CGA870
YQY740W1
O2
150
2-3
1-10/1-15
hospital oxygen wall system
YQY740W2
O2
150
2-3
1-10/1-15
YQY740W3
O2
150
2-3
                                                                   Â
Â
                                                                    Â
              4.  Our Services             Â
1.OEMÂ Accepted
A:Carve simple LOGO for you on cylinder shoulder by free.
B:Write shipping mark on outer packing carton according to your requirement.
C:Spray simple English letters, for example "Gas" ,"O2 Medical", and make water proof PVC label or sticker, colorful box, barcode ...etc.. according to your design.
2. Professional service
A: 24 hours on-line every day.
B: Quick reply your email and answer your questions.
C: Kind communication,  Careful attitude,Good patience,Professional product knowledge.
3.Good after-sales team
A:If there is any problem with the use of our product within two years, we can replace it for you a new product.Specific questions can contact customer service department
B:We also give some good advice to customers about there market.
C:Any questions about the product, We will contact the technical department in time to deal with the problem.
D.The quality supervision department may provide professional quality inspection certificates,test report of water pressure, air tightness, etc.
4.Deliver on time
Our delivery date is usually 25-30 days. We will send the goods to you on time according to the contract stipulation.
                                                                    Â
            5.  FAQ            Â
1. Can I do OEM in your factory?
 Yes, We provide OEM service to our customer.
2. What kind of certifications do you have for your products?
 We can offer CE, CB, RoHS, CCC,GS,UL,SAA.Others if our customer want it, we will get it.
3.What is the capacity of Soda Maker Cylinder?
Our capacity of Home Soda Maker Co2 cylinder is generally 0.6L. We can also supply the design and cylinder for your non-standard size.
4.Can you filling co2 gas into the 0.6L Co2 cylinder and what about the weight?
Yes! We can able to fill food grade co2 gas in the refilled co2 aluminum cylinder, and the price is very good. gas weight is about 360g-420g.
5.What about the working pressure?
It is about 150bar, we also have non-standard pressure.
6.What about the delivery time?
It generally will take us 25-30 days to finish the order.
                                                                    Â
             6.  Contact Me             Â
If you have any questions, or want to know more about the product information, you can contact me directly.
You can also direct access to our Web Query:http://shbene.en.made-in-china.com/
Tractor, Head Tow Truck
Model NO.: medical oxygen regulator
Product Name: Medical Oxygen Regulator
Model No: Yqy-740la
Service Medium: Oxygen;CO2
Max Inlet Pressure: 150bar
Max.Outlet Pressure: 2-3bar
Nominal Flowrate: 1-10L/Min;1-15L/Min
Inlet Thread Connect Valve: G5/8"-Rh;W21.8"-Rh
Outlet Connection: Nasal Oxygen Cannula/Mask
Color: as Required Medical Oxygen Regulator
Function: Oxygen Supply
Trademark: BEYIWOD, OEM
Transport Package: Carton
Specification: 190mm× 160mm× 100mm
Origin: Shanghai, China (Mainland)
HS Code: 9019200000
Model NO.: medical oxygen regulator
Product Name: Medical Oxygen Regulator
Model No: Yqy-740la
Service Medium: Oxygen;CO2
Max Inlet Pressure: 150bar
Max.Outlet Pressure: 2-3bar
Nominal Flowrate: 1-10L/Min;1-15L/Min
Inlet Thread Connect Valve: G5/8"-Rh;W21.8"-Rh
Outlet Connection: Nasal Oxygen Cannula/Mask
Color: as Required Medical Oxygen Regulator
Function: Oxygen Supply
Trademark: BEYIWOD, OEM
Transport Package: Carton
Specification: 190mm× 160mm× 100mm
Origin: Shanghai, China (Mainland)
HS Code: 9019200000
                                                                    Â
             3.  Packaging&Shipping           Â
PVC bag, colorful carton; as your requirement
                                                                    Â
             3.  Packaging&Shipping           Â
PVC bag, colorful carton; as your requirement