Hydraulic pump operation problems and there are reasons for killing the phenomenon with the exclusion method

1. Pump axial clearance and radial clearance is too small: axial, radial clearance is too small, you should replace the parts, adjust the axial or radial clearance.

2 needle rotation is not flexible: replace the needle roller bearings.

3. The concentricity of the cover and the shaft is not good: replace the cover so that it is concentric with the shaft.

4. Pressure valve failure: check the pressure valve spring is malfunctioning, the valve hole is blocked by dirt, slide valve and valve body failure; replace the spring, clear the valve hole dirt or change the valve.

5. Coupling pump and motor concentricity is not enough: Adjust the pump shaft and motor coupling concentricity, so that the error does not exceed 0.20mm.

6. Pump impurities: may be left in the assembly of iron, or oil inhalation of impurities; with a thin copper mesh filter system of total loss of oil to remove dirt.

Laser Cutting Engraving Machine

The manufacturing and production processes around the world have been developing and innovating at an increasingly rapid rate, and as innovation evolves, so too must all of the processes and people that are helping to drive it. Laser cutting able to work faster and for longer, more precisely which has been adopted in numerous industries, including automotive, aerospace, electronics, semiconductors and medical. It has huge range advantages such as