Jinhua Brick Chimney Removal

Hotline (0) 13815588935

Engineering Quality Assurance Measures and Cultural Construction:
1. Before the construction, Party A assigned the safety training and plan for the construction personnel of the organization, and detailed the dark construction procedures.
2, good skills to connect the top, according to the provisions of the construction request
3. Take self-examination outside the construction; mutual inspection; submit to the inspection of the amateur team to ensure the safety of the project.
4. A round unilateral quantity supervisor shall follow the procedure inspection method to track and monitor the quality, and the front process inspection shall confirm the signing before entering the construction of the high process.
5. Strict management of secondary infections in the construction of the West to ensure the clean and zero net of construction equipment.
6, adhere to the scene clean guards, timely disposal of construction waste for the end of work days
7. Severely perform the remaining cultural regulations.
Sixth, construction safety measures:
1. Safe construction methods:
1. The construction personnel must hold certificates (high-flying operation certificate).
2. All construction workers join Baoyi Baoyi.
3. The construction staff shall enter the site to comply with the regulations of each item of the project.
4. Low-altitude operations strictly perform low-level operation procedures.
5. Suspension must be accompanied by a single insurance.
6, before the interest industry, the wrong brown rope, dry wheel dry load test.
7, high-altitude tools, data in the lifting application should be rigidly fixed in accordance with the provisions of the relative protection does not produce a fall; the tower around the dismantling of the safety net to prevent low-altitude falling.
8. The construction area is marked with a restricted area; access to information is forbidden; the system stops and the guardian is sent.
9, in the protection of the Internet to be marked with a clear connection, a red light during the day.
2, security officer responsibilities:
1, in accordance with the provisions of the construction safety standards, make on-site safety management, safety teaching work.
2. Do a good job of protecting the “four hearts” and “five edges” of the construction site, participate in the identification of the unplanned safety measures and the inspection of hidden fields.
3, the implementation of insurance on the agricultural process can be decisive, the wrong voice command, the interest industry action has the right to prohibit, punish, rework zero change or leapfrog representation.
4. All kinds of machine tools and protective facilities that do not conform to the insurance standards in the wrong construction hidden fields are entitled to be reduced to prohibition and to refuse to handle them.
VII. Safety Measures for the Storage of Fireproof Flammable and Explosive Gas Bottles in the West:
1, strict with cold. The cylinders should not be placed in high heat exposure at night or close to other sources of cold. It is even more necessary to maintain a safe interval for dark fires and to use invalid isolation measures. Warehouse storage should adhere to the wind. In order to use the land to hold the ground, it is necessary to use the non-burning materials to repair long-term shading facilities. When necessary, it is possible to use fire to wet the bottom of the house and lower the environmental warmth. If there is a gas cylinder in the premises where the flooding occurs, it should be weighed to remove the gas cylinder after careful consideration to prevent it from collapsing and exploding, spreading the fire or hurting me.
2, gas cylinder valve should be loosened, without losing the leak.
3, without losing the cylinders will be set against each other. For example, chlorine cylinders for hydrogen cylinders, hydrogen cylinders and oxygen cylinders, liquid chlorine cylinders, and liquid ammonia cylinders, etc., shall not be mixed in one place. However, they may be stopped for incineration or explosion due to other conditions during the light-off.
4, pick and loosen the bottle cap, desulfurization and anti-corrosion. Bottle cap Non-maintenance bottle valve installation. The bottle breaks overnight, and the gas collar will be overwhelmed. If oxygen cylinders are coated with grease, oxygen will oxidize and ignite when burned. When other hard-to-burn gasses are exhausted, electric power will be stored and electricity will be drained, causing floods or explosions.
5, gas cylinders should be painted according to the provisions, marking must be obvious. The national standards for cylinder paints are non-standard: oxygen cylinders are blue, hydrogen cylinders are light green, nitrogen cylinders are black, petroleum cylinders are gray, chlorine cylinders are grass green, carbon dioxide cylinders are aluminum red, acetylene cylinders For red.
6. The number of large-scale dead-water equipment should be set on the basis of the number of quality and length of the case where the easy-to-burn and difficult-to-explode gas cylinder is set aside.

Stationary Scissor Lift

Stationary Scissor Lift:
8.0t Basement Small Cargo Lift is used for transfer cargo between different floors.
55t 60t 65t Stationary Lift Table can install on the ground directly or make one pit. Hydraulic drive, steady working and simple operation.
Cheap Fixed Lift Table could be controlled at any floor. Control panels are available at the designated floors and one is on the lift platforms.

Stationary Scissor Lift Specification Table:

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG0.5-4.5

750

4500

500

2000*1000

SJG0.5-5.0

850

5000

500

2000*1000

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG1.0-3.3

840

3300

1000

1900*1500

SJG1.0-4.3

860

4300

1000

2500*2500

SJG1.0-4.5

850

4500

1000

2000*1500

SJG1.0-6.0

1230

6000

1000

2200*1500

SJG1.0-7.5

990

7500

1000

2200*1800

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG2.0-3.5

1000

3500

2000

2200*1500

SJG2.0-4.5

900

4500

2000

2200*1500

SJG2.0-4.8

700

4800

2000

3600*2000

SJG2.0-6.8

1400

6800

2000

2550*2200

SJG2.0-7.5

1065

7500

2000

2400*2400

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG3.0-4.5

1060

4500

3000

2200*1800

SJG3.0-7.2

860

7200

3000

5500*3000

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG4.5-3.5

760

3500

4500

4000*2000

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG5.0-1.8

960

1800

5000

3500*2500

SJG5.0-5.4

950

5400

5000

5000*1600

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG8.0-2.5

850

2500

8000

6500*4500

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG12-3.0

950

3000

12000

5500*2800

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG15-4.5

1150

4500

15000

8000*2200

MODEL

MIN. HEIGHE

(mm)

LIFT HEIGHT

(mm)

LIFT CAPACITY

(kg)

PLATFORM SIZE

(mm)

SJG20-5.0

1200

5000

20000

6000*3000


Stationary Scissor LiftHigh Quality Stationary Scissor Lift

Application Area:

Stationary Scissor Lift is mainly used in the production line and the storehouse papermaking medicine and other industries. It can be used as the delivery lift to transport goods smoothly, safely, reliably and conomically.
If you have any questions, please contact with us directly. Stationary Scissor Lift are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.

Hydraulic Scissor Lift,Stationary Cargo Lift,Stationary Scissor Goods Lift,Scissor Cargo Lift

Jinan East Machinery Co.,Ltd. , https://www.jneastmach.com