DIN6923 Grade 4 Grade 8 M20 Galvanized Hexagon Flange Nut

DIN6923 grade 4 grade 8 M24 Galvanized Hexagon flange nut
 

 

Description

 

Flange nut, also calls the belt pad nut, tooth nuts, hex flange surface nut, flange nuts, etc.Mostly used in pipeline connection or need to increase the nut on the contact surface of the workpiece.A flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer.Flange nut and general hexagonal nut size and thread specification basic same, compared with a hexagonal nut, just it is washers and nut is a one-piece, and below have prevent slippery indented,This increases the nut in contact with the workpiece surface area, compared with the ordinary nut and washer combination, more solid and pulling force is greater.

Flange nut and general hexagonal nut size and thread specification basic same, compared with a hexagonal nut, just it is washers and nut is a one-piece, and below have prevent slippery insection, this increases the nut in contact with the workpiece surface area, compared with the ordinary nut and washer combination, more solid and tension.
General common flange nut specifications are below M20 roughly, because most of the flange nut is used on pipeline and flange, so the work-piece constraints, less compared with nut, flange nut specifications.M20 above some of the flange nut mostly flat flange, flange surface is not indented, most of these nuts used in some special equipment and special places,so we have less stock of this production.

 

Due to the small size of the flange nut, with irregular shape, some still need thread, so hot dip galvanizing has some obvious flaws.Fasteners, hot dip galvanized, although there are many defects, because of the hot dip galvanized coating thickness, good bonding strength, long-term effect is good.In electric power, communication, traffic department has been appreciated.
With the great development of China's electric power, transportation, is bound to promote the development of flange nut hot-dip zinc;So developed automatic centrifugal equipment, fasteners, hot dip galvanized process improvement, improve the quality of fasteners, hot dip galvanized coating is very important.

 

Specification

 

 

3.Application

 

Bolt and nut, multi-purpose in pipeline connection or need to increase the nut on the contact surface of the workpiece.Compared with the regular hexagon bolt, nut, hex flange bolts (nut) rather then bolt (female) and gasket (circle) integration, and has a non-slip indented on the flange, thus increasing the contact area on the surface of the nut and artifacts, compared with the ordinary nut and washer combination, undoubtedly more firmly and pull is greater.

 

Advantages

 

1) High quality in competitive price
2) Prompt delivery
3) Various types of long- term supply professinal stainless steel screws

DIN6923 grade 4 grade 8 M24 Galvanized Hexagon flange nut
 

 

Description

 

Flange nut, also calls the belt pad nut, tooth nuts, hex flange surface nut, flange nuts, etc.Mostly used in pipeline connection or need to increase the nut on the contact surface of the workpiece.A flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer.Flange nut and general hexagonal nut size and thread specification basic same, compared with a hexagonal nut, just it is washers and nut is a one-piece, and below have prevent slippery indented,This increases the nut in contact with the workpiece surface area, compared with the ordinary nut and washer combination, more solid and pulling force is greater.

Flange nut and general hexagonal nut size and thread specification basic same, compared with a hexagonal nut, just it is washers and nut is a one-piece, and below have prevent slippery insection, this increases the nut in contact with the workpiece surface area, compared with the ordinary nut and washer combination, more solid and tension.
General common flange nut specifications are below M20 roughly, because most of the flange nut is used on pipeline and flange, so the work-piece constraints, less compared with nut, flange nut specifications.M20 above some of the flange nut mostly flat flange, flange surface is not indented, most of these nuts used in some special equipment and special places,so we have less stock of this production.

 

Due to the small size of the flange nut, with irregular shape, some still need thread, so hot dip galvanizing has some obvious flaws.Fasteners, hot dip galvanized, although there are many defects, because of the hot dip galvanized coating thickness, good bonding strength, long-term effect is good.In electric power, communication, traffic department has been appreciated.
With the great development of China's electric power, transportation, is bound to promote the development of flange nut hot-dip zinc;So developed automatic centrifugal equipment, fasteners, hot dip galvanized process improvement, improve the quality of fasteners, hot dip galvanized coating is very important.

 

Specification

 

 

3.Application

 

Bolt and nut, multi-purpose in pipeline connection or need to increase the nut on the contact surface of the workpiece.Compared with the regular hexagon bolt, nut, hex flange bolts (nut) rather then bolt (female) and gasket (circle) integration, and has a non-slip indented on the flange, thus increasing the contact area on the surface of the nut and artifacts, compared with the ordinary nut and washer combination, undoubtedly more firmly and pull is greater.

 

Advantages

 

1) High quality in competitive price
2) Prompt delivery
3) Various types of long- term supply professinal stainless steel screws

Coating Auxiliary Agents

Coating Auxiliary Agents refers to a kind of auxiliary substance added in the process of coating production and use. Its main function is to improve the performance and use effect of coating. Common coating Additives include the following:
1. Dispersant: used to improve the dispersion of pigments, fillers and other solid particles in the coating, so that it is evenly dispersed in the coating, improve the color and coating property of the coating.
2. Thickener: used to increase the viscosity and rheology of the coating, so that it is easier to coat and cure.
3 Desiccant: used to accelerate the drying speed of paint, improve the durability and corrosion resistance of paint.
4. Antioxidants: Used to prevent oxidation deterioration of paint in long-term storage and use process, prolong the service life of paint.
5. Stabilizer: used to stabilize the chemical reaction and physical properties in the coating, to prevent the coating in storage and use of the process of change.
6. Colorant: used to adjust the color and color of the coating, so that it meets the needs of different applications.
7. Antibacterial agents: used to prevent the coating from being contaminated and growing by microorganisms in the process of use, and maintain the hygiene and safety of the coating.
There are many kinds of coating auxiliaries. Different kinds of coating auxiliaries have different roles and application ranges. Suitable coating auxiliaries can be selected according to the characteristics and use requirements of coatings.

Coating Auxiliary Agents,Coating Aids,Coating Additives,Non Slip Paint Additive

Wuxi Volksky New Materials Co.,Ltd. , https://www.volkskychem.com