Automatic 3D Fiber Laser Pipe Cutting Machine
Technical advantages:
1. Excellent and efficient processing: Five-axis linkage of the bus system realizes space leapfrog and flying cutting technology, and improves efficiency by more than 20-50%.
2. Pipe cutting system: user-friendly and easy to operate, with sufficient pipe process database.
3. Special bed design:reinforced integrated welding bed, after annealing and twice aging treatment, with good stability.
4. Simple and convenient maintenance: the front chuck has good sealing performance and is more durable against dust; The rear chuck blows air automatically, and the pipe wall is cleaner.
5. Automatic feeding rack(optional): realize automatic clamping, pushing and accurate feeding with fast cyclic feeding speed.
6. Good quality and high precision: front and rear full stroke precision pneumatic chuck, multi axis linkage at the same time, good cutting effect and high precision.
7. A15: Double chuck short tailing:the cutting head spans from the front to the back of the front chuck and cuts the last workpiece.The tailing ≥ 40mm can save more material costs.
8. Excellent processing performance: it adopts high rigidity thickened bed, with bus pipe cutting system and bus motor which has faster processing speed and higher precision.
9. Slag extraction system (optional): solve the problem that there is no residue on the inner wall of the pipe, eliminating the secondary vibration polishing process.
10. High efficiency feeding system (optional): high rigidity design of feeding rack, stable and fast feeding and refueling, and the cycle time is about 10 seconds.
Laser Cutting Machine Metal,Automatic Pipe Cutting Machine,Automatic Steel Pipe Cutting Machine,Tube Fiber Laser Cutting Machines GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com
As cutting tools, the advantage of cermet is its' inferior affinity with the work piece and extreme low wear coefficient, so cermet grades are preferably used in high speed finishing and semi-finishing or carbon steel, alloy steel, stainless steel and cast iron, where crater wear and buitl-up edge are problems. It enables a long tool life, close tolerances and beautiful cutting surfaces.
we can develop and produce various rods, tubes, plates, and wear parts of cemet to meet different application requirements, please withough hesitable to contact us if you have any needs for cermet rods, strips, wear parts.
Â
GRADE
ISO GRADE
HRA
Density
(g/cm3)TRS
(MPa)Toughness
(MPa/m)
BTC10
P01-P05
93.3
6.4
1980
7.7
BTC10A
P01-P05
92.8
6.8
2065
8.1
BTT15
P10-P15
91.7
6.5
2210
8.8
BT20A
P20-P30
90.8
6
2460
10.1
If any demand for cermet products such as cermet rods, cermet strips, cermet inserts, cermet tool parts, contact me soon and you will get a surprise!
cermet is a kind of hard alloy material, which manufacured through powder metalluric process based on Tic, TiN or Ti(C,N) AS Hard phase, and Ni, Co and Mo as binder. The name Cermet Cmbines the words ceramic and metal, in comparision to tungsten cemented carbide, cermet has improved wear resistance, chemical stability, thermal stability and lower density. But on the other hand, it also has lower compressive strength and toughness. Therefor, the cermet is very suitable for making metal cutting tools, especialloy for finishing and semi-finishing tools, as well as various wear-resistance, corrosion-resistance and heat -resistance parts such as ball valve, flange, small bearing metal, bearing sleeve, nozles, and seal-ring ect.
As cutting tools, the advantage of cermet is its' inferior affinity with the work piece and extreme low wear coefficient, so cermet grades are preferably used in high speed finishing and semi-finishing or carbon steel, alloy steel, stainless steel and cast iron, where crater wear and buitl-up edge are problems. It enables a long tool life, close tolerances and beautiful cutting surfaces.
we can develop and produce various rods, tubes, plates, and wear parts of cemet to meet different application requirements, please withough hesitable to contact us if you have any needs for cermet rods, strips, wear parts.
Â
GRADE
ISO GRADE
HRA
Density
(g/cm3)TRS
(MPa)Toughness
(MPa/m)
BTC10
P01-P05
93.3
6.4
1980
7.7
BTC10A
P01-P05
92.8
6.8
2065
8.1
BTT15
P10-P15
91.7
6.5
2210
8.8
BT20A
P20-P30
90.8
6
2460
10.1
If any demand for cermet products such as cermet rods, cermet strips, cermet inserts, cermet tool parts, contact me soon and you will get a surprise!
Model NO.: various
Density: 6.0~6.8g/cm3
Hardness: 90.8~94.0 Hra
Toughness: 7.1~10.3 MPa/M
Composition: Cermet
Shape: Round Bar, Rods, Strips, Inserts
Trademark: ubt
Transport Package: Cartons
Specification: various
Origin: China
HS Code: 8209101900
Model NO.: various
Density: 6.0~6.8g/cm3
Hardness: 90.8~94.0 Hra
Toughness: 7.1~10.3 MPa/M
Composition: Cermet
Shape: Round Bar, Rods, Strips, Inserts
Trademark: ubt
Transport Package: Cartons
Specification: various
Origin: China
HS Code: 8209101900
cermet is a kind of hard alloy material, which manufacured through powder metalluric process based on Tic, TiN or Ti(C,N) AS Hard phase, and Ni, Co and Mo as binder. The name Cermet Cmbines the words ceramic and metal, in comparision to tungsten cemented carbide, cermet has improved wear resistance, chemical stability, thermal stability and lower density. But on the other hand, it also has lower compressive strength and toughness. Therefor, the cermet is very suitable for making metal cutting tools, especialloy for finishing and semi-finishing tools, as well as various wear-resistance, corrosion-resistance and heat -resistance parts such as ball valve, flange, small bearing metal, bearing sleeve, nozles, and seal-ring ect.