The finned tube is to improve the heat exchange efficiency. By adding fins on the surface of the heat exchange tube, the outer surface area (or inner surface area) of the heat exchange tube is increased, so as to achieve the purpose of improving the heat exchange efficiency. Such a heat exchange tube . Usually used for heat exchange between liquid and gas.
Finned tube is a heat exchange element. As a heat exchange element, finned tubes usually work under high-temperature flue gas conditions for a long time. For example, the finned tubes usually used in boiler or harsh environments, high temperature and high pressure, and in a corrosive atmosphere. This requires that the finned tubes should have high anti-corrosion properties, Anti-wear properties, lower contact resistance, higher Stability and anti-dusting ability.
There are many types of finned tubes, and new varieties are constantly emerging. According to the classification of processing technology, there are extruded fin tube; high frequency welded finned tubes; rolled formed finned tubes; suit formed finned tubes ; cast finned tubes; tension wound finned tubes; Inserted tubes.
According to the shape of the fins, there are square finned tubes; circular finned tubes; spiral finned tubes; longitudinal finned tubes; corrugated finned tubes; spiral serrated fins Helical Serrated Finned Tubes; pin-shaped finned tubes; integral plate-shaped finned tubes; inner finned tubes.
According to whether the fin material of the finned tube is the same as that of the base tube, it can be divided into: single metal finned tube, bimetallic composite finned tube.
Single metal finned tubes are classified by material into copper finned tubes; aluminum finned tubes; carbon steel finned tubes; stainless steel finned tubes; cast steel finned tubes.
Finned Tube,Extruded Fin,Brown Fin Tube,Longitudinal Finned Tube Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com
Recently, the first trial production line of FAW-GM's Harbin Light Industry Company was held in the assembly plant of the new plant. The leaders of Harbin Light Company, members of the new plant construction project team and some employees of the company attended the ceremony to witness this exciting moment. 
Under the order of General Motors, General Manager of Noor Mark, Deputy General Manager of FAW-GM Harbin, and Gao Yongxiang, the first trial production light truck in the assembly shop slowly exited the production line. The successful production of the first trial production vehicle at the new plant marked that the new plant of HaGuang has basically had the ability to start production, and it also laid a solid foundation for the new base to reach mass production in advance.