4-5t/H Dryer Cyclinder, Rotary Drum Dryer for Wood Sawdust/Chips/Straw

Introduction for rotary drum dryer
Sawdust drum dryer is also called rotary dryer. Rotary drum dryer is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large rotating cylindrical tube, The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under.

Working principle for sawdust drum dryer,dryer, rotary dryer, drum dryer
Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.

Technical parameters for dryer, rotary dryer, drum dryer

No.	Type (Drum's size)	 Power(kw)	Capacity(t/h)
1	φ1.2*9m	8.8+22	0.8-1
2	φ1.5*9m	8.8+30	2-3
3	φ1.8*11m	8.8+45	4-5

Photos for dryer





Our services:
(1)  Warranty time: 1-2 years, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be count on buyer.
(2)  Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
(3)  Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
(4)  Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons.
(5)  Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.

Welcome to visit our factory. 
Liyang Weifeng Equipment CO.,ltd

Lip Gloss Tube

A lip gloss tube is a small, cylindrical container used to hold and dispense lip gloss. Lip Gloss Empty Tubes.It typically has a twist or click mechanism at the bottom that allows the user to push up the lip gloss from the tube and apply it to their lips.Empty Lip Gloss Containers. The tube is often made of plastic or metal and is compact and portable, making it easy to carry around in a purse or pocket. The top of the tube usually has a small applicator, such as a brush or sponge, that the user can use to apply the lip gloss smoothly and evenly. Lip gloss tubes come in various sizes, colors, and designs, catering to different preferences and styles.

Lip Gloss Tube,Custom Lip Gloss Tubes,Lip Gloss Empty Tubes,Empty Lip Gloss Containers

Kunshan Muchun Electric Co., LTD , https://www.muchunmanufacture.com