Corrosion Inhibition,Acid Corrosion Inhibitor,Organic Corrosion Inhibitors,Volatile Corrosion Inhibitor Jiangyin Lanyu Chemical Co.,Ltd. , https://www.lanyu-chem.com
Structure:
-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.
Power Pack Unit:
-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.
Other Important Features:
-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.
-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.
Standard Accessories:
-Main Drive Motor
-Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation
-Movable work station with pair of foot switch
-Pair of lifting links
-Pair of Sheet support
-Fine stroke adjustment rod with limit switch
-Manual back gauge with micro setting
-One suitable five way Die & Punch of EN - 9
-Centralised lubrication system with flow control valve for proper lubrication
-RAM tilting arrangement
Â
Model
(WC67Y)Nominal Pressure (kN)
Length of table (mm)
Distance Between Housing (mm)
Throat Depth (mm)
Stroke (mm)
Open Hight (mm)
Main Motor (kW)
Dimensions
(L x W x H) (mm)weight (T)
40/2000
400
2000
1600
200
110
335
4
2545x1510x2050
3
40/2500
400
2500
2000
200
110
335
4
2950x1510x2080
3.5
63/2000
630
2000
1600
250
110
350
5.5
2555x1600x2130
3.8
63/2500
630
2500
2000
250
110
350
5.5
2960x1600x2180
4.2
63/3200
630
3200
2600
250
110
350
5.5
3740x1600x2230
5.2
100/2500
1000
2500
2000
350
150
400
7.5
2980x1650x2330
6.3
100/3200
1000
3200
2600
350
150
400
7.5
3740x1650x2355
7
100/4000
1000
4000
3200
350
150
400
7.5
4550x1650x2450
8.8
100/5000
1000
5000
4000
350
150
400
7.5
5100x1500x2650
11.8
125/2500
1250
2500
2000
350
150
410
7.5
3980x1650x2370
7.5
125/3200
1250
3200
2600
350
150
410
7.5
3750x1650x2450
8.2
125/4000
1250
4000
3200
350
150
410
7.5
4550x1650x2470
9
125/5000
1250
5000
4000
350
150
410
7.5
5100x1500x2795
11.5
125/6000
1250
6000
4500
350
150
410
7.5
6100x1500x2895
14
160/2500
1600
2500
2000
350
150
425
11
2980x1715x2410
8.5
160/3200
1600
3200
2550
350
150
425
11
3750x1715x2450
11
160/4000
1600
4000
3200
350
190
450
11
4550x1715x2730
12
160/5000
1600
5000
4000
350
190
450
11
5100x1570x2900
15.5
160/6000
1600
6000
4500
350
190
450
11
6100x1570x3010
19
200/3200
2000
3200
2600
350
240
460
11
3750x1815x2715
13
200/4000
2000
4000
3200
350
240
460
11
4550x1815x2850
14
200/5000
2000
5000
3800
350
240
460
11
5100x1715x3020
18.5
200/6000
2000
6000
4500
350
240
460
11
6100x1715x3120
21
250/3200
2500
3200
2600
400
240
525
11
3750x2010x2850
15.5
250/4000
2500
4000
3200
400
240
525
11
4550x2010x3010
17
250/5000
2500
5000
3800
400
240
525
11
5100x1890x3190
21.5
250/6000
2500
6000
4500
400
240
525
11
6100x1890x3350
28
300/3200
3000
3200
2600
400
250
545
15
3740x2100x3235
19.5
300/4000
3000
4000
3200
400
250
545
15
4340x2100x3300
22
300/5000
3000
5000
3800
400
250
545
15
5100x2100x3430
26
300/6000
3000
6000
4500
400
250
545
15
6100x2100x3490
29
Structure:
-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.
Power Pack Unit:
-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.
Other Important Features:
-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.
-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.
Standard Accessories:
-Main Drive Motor
-Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation
-Movable work station with pair of foot switch
-Pair of lifting links
-Pair of Sheet support
-Fine stroke adjustment rod with limit switch
-Manual back gauge with micro setting
-One suitable five way Die & Punch of EN - 9
-Centralised lubrication system with flow control valve for proper lubrication
-RAM tilting arrangement
Â
Model
(WC67Y)Nominal Pressure (kN)
Length of table (mm)
Distance Between Housing (mm)
Throat Depth (mm)
Stroke (mm)
Open Hight (mm)
Main Motor (kW)
Dimensions
(L x W x H) (mm)weight (T)
40/2000
400
2000
1600
200
110
335
4
2545x1510x2050
3
40/2500
400
2500
2000
200
110
335
4
2950x1510x2080
3.5
63/2000
630
2000
1600
250
110
350
5.5
2555x1600x2130
3.8
63/2500
630
2500
2000
250
110
350
5.5
2960x1600x2180
4.2
63/3200
630
3200
2600
250
110
350
5.5
3740x1600x2230
5.2
100/2500
1000
2500
2000
350
150
400
7.5
2980x1650x2330
6.3
100/3200
1000
3200
2600
350
150
400
7.5
3740x1650x2355
7
100/4000
1000
4000
3200
350
150
400
7.5
4550x1650x2450
8.8
100/5000
1000
5000
4000
350
150
400
7.5
5100x1500x2650
11.8
125/2500
1250
2500
2000
350
150
410
7.5
3980x1650x2370
7.5
125/3200
1250
3200
2600
350
150
410
7.5
3750x1650x2450
8.2
125/4000
1250
4000
3200
350
150
410
7.5
4550x1650x2470
9
125/5000
1250
5000
4000
350
150
410
7.5
5100x1500x2795
11.5
125/6000
1250
6000
4500
350
150
410
7.5
6100x1500x2895
14
160/2500
1600
2500
2000
350
150
425
11
2980x1715x2410
8.5
160/3200
1600
3200
2550
350
150
425
11
3750x1715x2450
11
160/4000
1600
4000
3200
350
190
450
11
4550x1715x2730
12
160/5000
1600
5000
4000
350
190
450
11
5100x1570x2900
15.5
160/6000
1600
6000
4500
350
190
450
11
6100x1570x3010
19
200/3200
2000
3200
2600
350
240
460
11
3750x1815x2715
13
200/4000
2000
4000
3200
350
240
460
11
4550x1815x2850
14
200/5000
2000
5000
3800
350
240
460
11
5100x1715x3020
18.5
200/6000
2000
6000
4500
350
240
460
11
6100x1715x3120
21
250/3200
2500
3200
2600
400
240
525
11
3750x2010x2850
15.5
250/4000
2500
4000
3200
400
240
525
11
4550x2010x3010
17
250/5000
2500
5000
3800
400
240
525
11
5100x1890x3190
21.5
250/6000
2500
6000
4500
400
240
525
11
6100x1890x3350
28
300/3200
3000
3200
2600
400
250
545
15
3740x2100x3235
19.5
300/4000
3000
4000
3200
400
250
545
15
4340x2100x3300
22
300/5000
3000
5000
3800
400
250
545
15
5100x2100x3430
26
300/6000
3000
6000
4500
400
250
545
15
6100x2100x3490
29
Model NO.: 125t*3200
Type: Press Brake
Estun Nc System: Estun E21 Nc System
Servo Motor/ Servo Drive: Yaskawa From Japan Brand
CNC Control Axis: Y X Axis Crowning(Electro-Hydraulic Servo)
Electrical Components: Schneider Electrical From French
Motor Power: Siemens From Germany
Backgauge & RAM Drive: Inverter From Schneider Electrical
Ball Screw/ Polished Rod: Hiwin From Taiwan Brand
Hydraulic System: Bosch-Rexroth Form Germany
Tubing Connector: Emb Form Germany Brand
Keywords: Nc Press Brake Machine
Trademark: AccurL
Transport Package: Wooden Case
Specification: 3790x1935x2420
Origin: China Ma′anshan
HS Code: 84622990
Model NO.: 125t*3200
Type: Press Brake
Estun Nc System: Estun E21 Nc System
Servo Motor/ Servo Drive: Yaskawa From Japan Brand
CNC Control Axis: Y X Axis Crowning(Electro-Hydraulic Servo)
Electrical Components: Schneider Electrical From French
Motor Power: Siemens From Germany
Backgauge & RAM Drive: Inverter From Schneider Electrical
Ball Screw/ Polished Rod: Hiwin From Taiwan Brand
Hydraulic System: Bosch-Rexroth Form Germany
Tubing Connector: Emb Form Germany Brand
Keywords: Nc Press Brake Machine
Trademark: AccurL
Transport Package: Wooden Case
Specification: 3790x1935x2420
Origin: China Ma′anshan
HS Code: 84622990
Plate Bending Machine With ISO & CE Certificate