EVA Faux Teak Sheet comes in double layers EVA material, it appears grooves to show the bottom color after the roller cutting, which makes it looks like a teak wood. So instead of using a real wood for the boat flooring, more and more people put their focus on this no maintain and Eco-friendly EVA marine sheet.
Made from marine grade UV resistant, closed cell, high density EVA foam material, it stands perfectly even in a strong sunlight area. And the EVA foam material makes it softer and more comfortable for people standing there bare feet than real teak or PVC teak. Some would concerned if the boat mat would be not durable to use since it is made from foam material. Well, it may not hard like real teak or PVC teak, and compete the durability with those two, but with a higher density EVA foam, we are able to compete with other suppliers who try to compromise the density to reach to a lower price.
The sheet comes in 230cm x 90cm or 250cm x 120cm, user can cut the sheets into size to fit the shape of boat decking, then just peel and stick since the sheets we offer is with 3M adhesive on the backing. It can be applied on boat decking of course, and other like swim platform pad, helm station pad or simple seat pad.
What's more, this kind of sheets can be applied in recreation vehicle for luxury flooring, a safe traction mat for the edge of swimming pool, a beautiful looking for flooring in room or balcony.
Eva Faux Teak Sheet,Faux Teak Sheet,Foam Faux Teak Sheet,Faux Teak Strip,Faux Teak Edging,Eva Faux Teak Deck Sheet Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmat.com
Flowmeter indication should be between 0.8~~1.2. If airtightness is reduced, the following components should be inspected: Flowmeters, glass tubes, rubber tubes, and pneumatic connections.
[2] Electrolyte cell 1, air leakage from the electrolysis cell leads to a decrease in gas tightness of the gas path.
2. Dirt on the pole piece in the electrolytic cell should be cleaned 3. The pole piece and controller in the electrolytic cell should be connected reliably.
[3] Blender:
The disappearance of the magnetic force of the stir bar is a common cause of stirring out-of-step and should be replaced.
[4] temperature control part 1, A. The temperature shows 1999°C, indicating that the thermocouple circuit is not open or its internal circuit is open.
B. The temperature does not increase at all times, but there is a heating current, which means that the thermocouple is reversed.
C. If the temperature shows room temperature, it means that the thermocouple wire is short-circuited.
2, the temperature value is less than the set furnace temperature, there should be heating furnace flow. If the furnace flow shows 0.0A, it means that the insurance tube is bad, and the internal opening of the silicon carbon tube itself or the connection is not connected.
3, temperature fluctuations are too large, generally the reason for the silicon carbon tube. 
Sulphur analyzer common faults and exclusion [1] air tightness of the gas pipeline: