All-in-one Roll Materials Cutting Machine
All-in-one Roll Materials Cutting Machine
Flying Man all-in-one cutting machine can cut the width of 1-700mm, thickness up to 0.8mm of the materials, suitable for non-woven fabric cutting, aluminum foil cutting, copper foil cutting, reflective film cutting, plastic film cutting, Kraft paper cutting, etc. This automatic cutting machine is suitable to cut the wider width and wider diameter of roll materials. Increase the feeding drum, can straighten the material easy to fold, increase the feeding frame reduction gear, prevent processing too fast lead to the material roll because of inertia knotting and rolling to the ground, resulting in material breaking pull deformation, slip and scratch.
This cutting machine has different models#FMHZ-400A/FMHZ-500A/FMHZ-600A/FMHZ-700A, cutting width from 1mm to 700mm, cutting thickness is different. The maximum cutting thickness is 0.8mm.
Roll To Sheet Cutter,Film Cutting Machine,Non Woven Cutting Machine,Non Woven Fabric Cutting Machine Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.flyingmans.com
The Three Gorges Shiplift is the first gear-and-rack climber designed and manufactured in China. Its small-gear bracket system adopts a new four-bar linkage mechanism with complex components, high weld quality requirements and difficult construction of structural parts. There are many components and the assembly is difficult; the small gear carrier system needs to complete the load test in the factory. The test plan design and the foundation are difficult to fix; the test equipment is many, involving many factories, covering the machine, electricity, liquid and interface coordination difficulty. Big. In response to this situation, the company proposed to focus on the production organization of the pinion carrier as the key control point of the production organization of the Three Gorges shiplift. The production management department is focused on the production organization, tight and targeted, and raw materials are returned. After the factory, the company negotiated with the factory supervisor to complete the manufacturing network plan as an outline to guide the production of pinion gear. In order to make the plans come true, the company insisted on holding a weekly production meeting to successfully overcome the manufacturing process. The problem has laid a good foundation for the orderly progress of the entire project.
CSIC Heavy Industry News, recently, the first set of small gear carrier system manufactured by Wuhan Marine Machinery Co., Ltd. successfully completed various tests and acceptances and delivered smoothly. This is a phased achievement of the company since it took over the installation and manufacturing contract for the main equipment of the Three Gorges shiplift in November 2010.