The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.
President Xi asked in detail about the cost of LEDs, the difference between plant lighting and general lighting, and whether it can be combined with photovoltaics to further reduce the cost of electricity running. At the same time, President Xi also discussed with the researcher Yang Qichang of the Institute of Agricultural Environment and Sustainable Development of the Chinese Academy of Agricultural Sciences how to use the urban space to establish a plant factory service platform, build a service network system, and how to visit the plant lighting factory with family habits on the morning of June 3 General Secretary of the CPC Central Committee, President of the State, and Chairman of the Central Military Commission Xi Jinping accompanied the Vice Premier Liu Yandong and the Minister of Science and Technology Wan Gang to the booth of the intelligent LED plant factory. President Xi asked in detail about the cost of LEDs, the difference between plant lighting and general lighting, and whether it can be combined with photovoltaics to further reduce the cost of electricity running. At the same time, President Xi also discussed with the researcher Yang Qichang of the Institute of Agricultural Environment and Sustainable Development of the Chinese Academy of Agricultural Sciences how to use the urban space to establish a plant factory service platform, build a service network system, how to integrate with the family plant factory, and realize vegetable production in the city. Interesting topic. Finally, President Xi pointed out that the intelligent LED plant factory has subverted the traditional farming methods and provided new ideas for future food security. The results are of great significance. It is necessary to further increase the research and development of intelligent LED plant factories and accelerate the pace of industrialization to benefit More people's livelihood. Huacan's major asset restructuring Huacan Optoelectronics announced the announcement of the major asset restructuring extension and resumption on the evening of June 13, stating that the company's target assets for the reorganization were a SPV (special purpose company) in the process of being established. The SPV is a holding company. There is no actual business in itself. The SPV intends to purchase 100% of the equity of the target company from the shareholders of the target company of this transaction. The target company of this transaction is a leading sensor company in the microelectronics industry. The announcement stated that the controlling shareholder of the underlying assets of this transaction is Yiwu Harmony Corelight Equity Investment Partnership (Limited Partnership), and the actual controller of the underlying assets has not yet been determined. The transaction purchased assets for the issuance of shares and raised matching funds and related transactions. The specific plan has not yet been determined. At present, the company and the target company shareholders have signed a memorandum of reorganization, and are further negotiating and communicating on the detailed transaction plan. Eight most technically On June 11, at the LEDforum 2016 International LED Market Trend Summit Forum, Hongli Optoelectronics Wu Gan explained the eight most technical technologies of the LED industry. The largest market technology: the most realistic technology of lamp and bulb packaging technology: the most powerful technology of filament lamp: the most helpless technology of plant lighting: the highest technology on projectors, stage lights, flash, etc.: the most fried lifi technology The technology of the day: CSP technology. The backlight market is an important application higher than the mobile phone flash market, and there are many technical solutions for CSP backlight demand mining. The most profitable technology: automotive lighting The most difficult technology: quantum dot technology and UV technology. Finally, Wu Gan added that technology may not be the most important for a company. If it is to be transformed in the later stage, the change of business model will be more important. Shangyu LED industry ushered in core power Shangyu LED industry in Shaoxing City, Zhejiang Province, which relied on the development of imported chips, is expected to change its development path with the arrival of a cutting-edge project. On the 6th, Professor Nakamura Shuji, the winner of the 2014 Nobel Prize in Physics and the father of LED Blu-ray in Shanghai, said that he will participate in the industrialization of Blu-ray related results with his students. Last month, at the 2016 Zhejiang (Silicon Valley) Overseas High-level Talents Fair held in the United States, Dr. Zhao Yuji, a student of the Nakamura Shuji and a member of the Nobel Prize team, signed a contract with the high-power LED chip and laser application technology project. Cooperation Framework Agreement. This means that Shangyu LED industry has ushered in the opportunity of core power to expand into the upstream industry chain. It is reported that in the nearly half-month period of signing, a number of lighting leading enterprises including Shangguang Lighting have taken the initiative to carry out industrial cooperation and negotiation with the institute. Yiguang debuts at the US Lighting Show to showcase a full range of lighting and automotive components. The global LED optoelectronics industry's leading manufacturer, Everlight Electronics Co., Ltd. exhibited complete lighting at the American Lighting Show (5/5-5/7, Booth: 1329) Automotive components, such as high-efficiency EAHE5630 (0.2W), Ultra Warm White EAHP 3030 (1.0W), dual-color COB series, many popular packaging and color for plant lighting, will also be unveiled at the show. Yiguang EAHE5630 series (0.2W) emphasizes its high efficiency, its luminous efficiency is up to 180lm/W, and it can reach 187lm/W when it is 5700K color temperature. Its excellent performance can meet the expectations of users. The new EAHP3030 series (1W) 2200K color temperature creates a light-like atmosphere like a tungsten light, suitable for lighting and lighting environments that emphasize lighting. The new EAHP5050 and EAHP9595 packages are designed for high lumen density lamps. Yiguang also exhibited complete automotive products, including the gold bracket products launched in the first quarter of this year, A09KU, 67-21U and 67-31U, through the gold plating process of the bracket surface, strengthening the high conductivity of the LED package and excellent resistance to vulcanization. characteristic. LED Prospects: Phase Consistency Although the LED industry is regarded as one of the tragic businesses in the market, the 2014 Nobel Prize in Physics, the winner of the Blu-ray godfather, Nakamura Shuji is still optimistic about the LED industry. The International Semiconductor Exhibition debuted recently. Nakamura Shuji was invited to Taiwan to participate in the Summit of Technology Elite Leaders. In addition to speaking about the invention of blue LED, laser and solid-state lighting, he will also discuss with the Vice President of the Executive Yuan Zhang Shanzheng and Sun Moonlight Chief Operating Officer Wu Tianyu. When Nakamura Shuji was interviewed, he said that he is optimistic about the prospects of the LED industry. It is only difficult for manufacturers to produce components, and the industry should develop toward the system. He also revealed that the next breakthrough in LED is phase consistency, so that the light will pass far. Nichia has filed a lawsuit against BQ in the UK Nichia, a Japanese LED giant, recently issued a statement saying that the company has filed a lawsuit against a British company in violation of the Japanese patent for LED in the Patent Court of the High Court of London. The defendant's company is BQPLC, a UK DIY distributor. Nichia said that the LED products sold by British BQ PLC infringed three LED patents for YAG phosphors. The patent number violated is the European patent number: European Patents Nos. 0936682, 2197073, and 2276080 (YAG-based phosphor patents), and the lawsuit date is 5/27 (UK time). These are up to 20 LED products that have been infringed by Japan, including 240 watts of LED lights (model YF-10-44), which is highlighted in Japan for the maintenance of rights and will be available in any market worldwide. Advocate the rights of the company through legal maintenance.