China Shoring Prop,Steel Prop Accessories Sleeve Nut manufacturer, choose the high quality Steel Structure Hex Bolt,Seismic Sway Bracing, etc.
Shoring Prop, Steel Prop Accessories Sleeve Nut,Steel Structure Hex Bolt ,Seismic Sway Bracing
Shoring Prop,Steel Prop Accessories Sleeve Nut,Steel Structure Hex Bolt Manufacturer in China
Steel Prop Accessories Sleeve Nut Shoring Prop,Steel Prop Accessories Sleeve Nut,Steel Structure Hex Bolt,Seismic Sway Bracing Hebei Qierjie New Energy Technology co., Ltd , https://www.qejfastener.com
     LDP series single-stage end-suction horizontal centrifugal pumps are made by way of improving the
design of NT series horizontal centrifugal pumps of ALLWEILER PUMPS company with the performa nce
parameters identical to those of NT series and in line with the requirements of ISO2858.
The products are produced strictly according to the relevant requirements, so they have a stable quality and reliable performance and are the brandnew ones instead of model ES horizontal pump, model DL pump etc. ordinary pumps.
Technical specifications
Capacity
3.5-1400 m3/h
Head
3-140 meter
Working Pressure
up to 1.6 Mpa
Diameter
DNÂ 25-350 mm
Temperature range
-20ºC~110 ºC
Pump speed
1000-3600 RPM
√ LDP Advantage High Efficency High Efficency End Suction Circulating Water Pump
1.Compact structure.  √Â
These series pumps have an Horizontal structure, beautiful appearance and less area of occupied land.
2.Stable running, low noise, high concentricity of assembly. √Â
The cluth is used to link both pump and motor, making the impeller of a good balance of moving-resting, resulting in no vibration during running and improving the environment of use.
3.No leakage. √Â
A mechanical seal antisepticcarbide alloy and packing seal of is used for the shaft sealing.
4.Convenient service. √Â
Service can be easily done without removing any pipeline because of the back-door structure.
√ Where can use our LDP End-suction Centrifugal pump ?
LDP series horizontal centrifugal pump is used to
- Transport pure water and other liquids of the similar physical nature as pure water
- Water supply and drainage in industries and cities
- boost water-feeding of high buildings
- Park/Garden Irrigation
- Fire-fighting boost
- Remote mater-transportation
- Warming or cold-hot water circulation
- Boost in bathrooms
- Equipment completing as well. Â
√  STRUCTURE DESCRIPTION of  LDP End-suction Centrifugal pump ?
See the figure for the structure. This pump consists of pump casing, impeller, pump cover, suspension body and shaft etc.components. It is a single-stage single-suction horizontal centrifugal pump a nd b oth p ump c asing and cover are separated from the back side of the impeller, that is the back-door structural form. For most of the pumps, a seal ring is set in both front and back of the impeller to make a balance action on the axial force of the rotor.There are soft packing seal and mechanical seal, make a note at order.
No
Name
Quantity
No
Name
Quantity
1
Pump casing
1
6
Mechnical seal parts
1
2
Impeller
1
7
Packing parts
1
3
Impeller nut
1
8
Breakwater ring
1
4
Pump cover
1
9
Suspension body parts
1
5
Seal ring
2
10
Shaft
1
About Us 
Production process
International Certificate
kinds of used for Pure, slightly polluted and gressive liquid with a viscosity of up to 150 mm2/s, solid particles less than 75 mm.
 
Company Image
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training                  Equipment evaluation
Installation and debugging    Troubleshoot
Maintenance                          Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
Contact
Mr Seth Chen
Telphone
0086-13817768896
     LDP series single-stage end-suction horizontal centrifugal pumps are made by way of improving the
design of NT series horizontal centrifugal pumps of ALLWEILER PUMPS company with the performa nce
parameters identical to those of NT series and in line with the requirements of ISO2858.
The products are produced strictly according to the relevant requirements, so they have a stable quality and reliable performance and are the brandnew ones instead of model ES horizontal pump, model DL pump etc. ordinary pumps.
Technical specifications
Capacity
3.5-1400 m3/h
Head
3-140 meter
Working Pressure
up to 1.6 Mpa
Diameter
DNÂ 25-350 mm
Temperature range
-20ºC~110 ºC
Pump speed
1000-3600 RPM
√ LDP Advantage High Efficency High Efficency End Suction Circulating Water Pump
1.Compact structure.  √Â
These series pumps have an Horizontal structure, beautiful appearance and less area of occupied land.
2.Stable running, low noise, high concentricity of assembly. √Â
The cluth is used to link both pump and motor, making the impeller of a good balance of moving-resting, resulting in no vibration during running and improving the environment of use.
3.No leakage. √Â
A mechanical seal antisepticcarbide alloy and packing seal of is used for the shaft sealing.
4.Convenient service. √Â
Service can be easily done without removing any pipeline because of the back-door structure.
√ Where can use our LDP End-suction Centrifugal pump ?
LDP series horizontal centrifugal pump is used to
- Transport pure water and other liquids of the similar physical nature as pure water
- Water supply and drainage in industries and cities
- boost water-feeding of high buildings
- Park/Garden Irrigation
- Fire-fighting boost
- Remote mater-transportation
- Warming or cold-hot water circulation
- Boost in bathrooms
- Equipment completing as well. Â
√  STRUCTURE DESCRIPTION of  LDP End-suction Centrifugal pump ?
See the figure for the structure. This pump consists of pump casing, impeller, pump cover, suspension body and shaft etc.components. It is a single-stage single-suction horizontal centrifugal pump a nd b oth p ump c asing and cover are separated from the back side of the impeller, that is the back-door structural form. For most of the pumps, a seal ring is set in both front and back of the impeller to make a balance action on the axial force of the rotor.There are soft packing seal and mechanical seal, make a note at order.
No
Name
Quantity
No
Name
Quantity
1
Pump casing
1
6
Mechnical seal parts
1
2
Impeller
1
7
Packing parts
1
3
Impeller nut
1
8
Breakwater ring
1
4
Pump cover
1
9
Suspension body parts
1
5
Seal ring
2
10
Shaft
1
About Us
Production process
International Certificate
kinds of used for Pure, slightly polluted and gressive liquid with a viscosity of up to 150 mm2/s, solid particles less than 75 mm.
Â
Company Image
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training                  Equipment evaluation
Installation and debugging    Troubleshoot
Maintenance                          Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
Contact
Mr Seth Chen
Telphone
0086-13817768896
Model NO.: LDP
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: End Suction Type
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
OEM: Ok
Certificate: ISO
Paint: Blue or Customer-Specified
Material: Cast Iron, Stainless Steel, or Others
Trademark: TONGKE
Transport Package: Wooden-Case
Specification: DN50-DN300
Origin: China
HS Code: 8413709990
Model NO.: LDP
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: End Suction Type
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump
OEM: Ok
Certificate: ISO
Paint: Blue or Customer-Specified
Material: Cast Iron, Stainless Steel, or Others
Trademark: TONGKE
Transport Package: Wooden-Case
Specification: DN50-DN300
Origin: China
HS Code: 8413709990
High Efficency High Efficency End Suction Circulating Water Pump for hot waterQuality certificate
Quality certificate