Specification D L D1 M MFT-08-100-M4 8 100 8 M4 MFT-10-80-M5/M6 10 80 10 M5/M6 MFT-10-100-M5/M6 10 100 10 M5/M6 MFT-10-150-M5/M6 10 150 10 M5/M6 MFT-12-100-M6 12 100 12 M6 MFT-12-150-M6 12 150 12 M6 MFT-15-100-M8 15 100 15 M8 MFT-15-150-M8 15 150 15 M8 MFT-15-200-M8 15 200 15 M8 MFT-15.6-150-M8 15.6 150 15.6 M8 MFT-15.6-200-M8 15.6 200 15.6 M8 MFT-15.6-250-M8 15.6 250 15.6 M8 MFT-16-100-M8 16 100 16 M8 MFT-16-150-M8 16 150 16 M8 MFT-16-200-M8 16 200 16 M8 MFT-16-250-M8 16 250 16 M8 MFT-16-300-M8 16 300 16 M8 MFT-19-150-M10 19 150 19 M10 MFT-19-200-M10 19 200 19 M10 MFT- 19-250-M10 19 250 19 M10 MFT-20-100-M10 20 100 20 M10 MFT-20-150-M10 20 150 20 M10 MFT-20-200-M10 20 200 20 M10 MFT-20-250-M10 20 250 20 M10 MFT- 20-300-M10 20 300 20 M10 MFT-24-150-M12 24 150 24 M12 MFT-24-200-M12 24 200 24 M12 MFT-24-250-M12 24 250 24 M12 MFT-24-300-M12 24 300 24 M12 MFT-25-150-M12 25 150 25 M12 MFT-25-200-M12 25 200 25 M12 MFT-25-250-M12 25 250 25 M12 MFT-25-300-M12 25 300 25 M12 MFT-32-150-M16 32 150 32 M16 MFT-32-200-M16 32 200 32 M16 MFT-32-250-M16 32 250 32 M16 MFT-32-300-M16 32 300 32 M16 MFT-32-350-M16 32 350 32 M16 MFT-32-400-M16 32 400 32 M16 Specification D (mm) D1 (mm) L L1 M MFT10-50-150-M6 10 9.5 150 50 M6 MFT12-50-150-M6 12 11.5 150 50 M6 MFT16-50-150-M8 16 15.5 150 50 8 MFT16-50-200-M8 16 15.5 200 50 8 MFT16-70-250-M8 16 15.5 250 70 8 MFT16-85-120-M8 16 15.6 120 85 8 MFT16-95-150-M8 16 15.6 150 95 8 MFT16-145-200-M8 16 15.6 200 145 8 MFT20-40-100-M10 20 19.6 100 40 10 MFT20-90-150-M10 20 19.6 150 90 10 MFT20-140-200-M10 20 19.6 200 140 10 MFT25-40-100-M12 25 24.6 100 40 12 MFT25-85-150-M12 25 24.6 150 85 12 MFT25-135-200-M12 25 24.6 200 135 12 MFT32-70-200-M16 32 31 200 70 16 MFT32-130-300-M16 32 31 300 130 16 MFT32-150-350-M16 32 31 350 150 16 Company Informations Main Products Monthly Capacity of 15Ton Strictly QC Other Tungsten Carbide Products in Lihua Foreign Sales Manager: Coco
There are many kinds of pneumatic pipes, which are generally produced with PU raw materials, with stable quality, high pressure resistance, weather resistance, wear resistance, zigzag resistance, smooth and flexible pipe body, bright color, high elasticity, winding resistance and small bending radius.
The tube body is smooth and flexible, bright color, high elasticity, winding resistance and small bending radius. Temperature range: - 15 - + 70 ℃. Pu Pneumatic Pipe,Pu Air Hose,Pu Pneumatic Hose,Pneumatic Spring Hose, Pu Pneumatic Hose Tubing Glove Industry Co.,Ltd. , https://www.glovemech.com
It is an important tool for for machining in CNC machining,Its purpose to prevent tools from shanking and to control,make tools vibarte which also called CNC extension rod. Especially as the CNC precision machining developing,the traditional CNC machining from 5000 rpm,6000 to 8000 rpm,after more sophisticated and efficient cutting speed will be developed to more than 20,000 turn. Such high-speed cutting, Higher requirements of sufficient seismic performances is needed carbide stamping pole must be uniform material, consistent performance of its and Precision concentric assurance to achieve such a high speed cutting operation requirements.
 
Â
About Lihua Cemented Carbide
Established in 1990, specialized in production carbide products more than 20 years and located in zhuzhou city which is the hometown of tungsten carbide in China .
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc .
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Cusomized cutter:woodworking tool, V-cutter, textile cutter, shoes cutter ects. Any kinds of customized carbide products .
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
 
Mobile: +86 13973352165(available 24 hours.)
Website: http://en.lihuacarbide.com/
Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
Product classification
1. Pu pneumatic pipe
2. Pu (polyether) pneumatic pipe
3. Pu (polyurethane) bobbin
4. Pu (polyether) bobbin
difference:
Polyurethane pneumatic pipe is over air type. If it is used for over water, its service life will be affected,
Polyether pneumatic pipe can pass air or water, with more stable physical properties and longer normal service life. It is an ideal material for pneumatic pipe.
The bobbin is wrapped with a layer of fiber in the middle of the common pneumatic pipe. Therefore, the bobbin is more solid, pressure resistant and non explosive than the common pneumatic pipe.
Product selection
What should be considered when choosing the type of plastics for blow molding pneumatic pipe?
The following aspects should be considered in the selection of pneumatic pipe materials.
Whether the wall thickness of the welded blank of the pneumatic pipe can be kept uniform, whether a higher blowing pressure is needed, whether the blowing is uniform, whether the surface of the pneumatic pipe is bright, whether the demoulding is easy, and whether the strength can meet the requirements, etc.
Performance comparison of plastics for blow molding pneumatic pipe. The pneumatic tube formed by blow molding is in thermoelastic state, and its density is smaller than that after cooling and shaping, resulting in shrinkage. For the general size of pneumatic pipe is not strict, forming shrinkage has little effect. But for the pneumatic pipes of specified size, such as some hoses used in precision machines, large shrinkage has a considerable impact. The larger the blowing volume is, the more significant the effect is.
The advantages of extruding and blowing plastic forming pneumatic pipe are less investment in production equipment, simple equipment structure, easy mold manufacturing, high forming of pneumatic pipe during production, uniform temperature control, and various specifications of pneumatic pipe can be formed. The disadvantage is that the wall thickness uniformity of pneumatic pipe is poor.
The advantages of injection blow molding pneumatic pipe are that the plastic pneumatic pipe has good product quality, accurate dimensions, no seams, uniform wall thickness, multi-mode molding production, high degree of automation, which is very suitable for large-scale high-efficiency production of small specifications. The disadvantage is that the investment of equipment and molding die is large, and the operation and production need skilled workers.
Product advantages
Excellent flexibility. The bending radius is small and the bending resistance is good. It has high elastic recovery memory effect.
Wear resistance, tearing and impact. It can resist some non corrosive chemicals and oils. It can circulate inflammable objects and weld.
It can be incinerated into ash 100% and is recognized as an environmental protection product
Good damping, smooth inner wall, low friction coefficient, high medium passing capacity, good flame retardant, non-toxic and tasteless,
The color can be customized on demand for easy pipeline identification.
Applicable range of pneumatic pipe
Assemble all kinds of pneumatic tools, pneumatic automation machinery, air compressor and all kinds of connecting pneumatic components.
performance parameter
Abrasion resistance: 30mg
Ultimate elongation: 390-480%
Burst pressure: 20-30kgf / cm2
Working vacuum: - 25hg60-15kgf / cm2
Tensile strength: 300kgf / cm2
The safety factor ratio of burst pressure and long-time service pressure is 3:1
Tips for pneumatic pipe
Polyurethane pneumatic hose is suitable for compressed air, ordinary industrial water and non corrosive oil. In order to maintain a long service life, it must be used under rated working pressure and ambient temperature. As the temperature rises, the working pressure should be reduced accordingly. If it exceeds the limit, the hose may break. If the fluid temperature is too high or the fluid is corrosive, the hose may break. If the working environment temperature is too high or there is chemical gas in the working space, the hose may crack. If the hose is stored in a wet place or the storage period is too long, the hose may hydrolyze or age, which may lead to fracture
Model NO.: LHCBSU0036
Performance Classification: High-End CNC Machine Tools
Certification: ISO 9001
Condition: New
Place of Origin: Zhuzhou China (Mainland)
Business Type: Manufacturer
Hardness: 89.5~92.7hra
City: Zhuzhou China (Mainland)
Performance: Excellent Wear Resistance
Technology: Advanced
Advantage: Over 20 Years Experinces in This Line
Material: 100% Raw Material
Trademark: LIHUA
Transport Package: Standard or Customized
Specification: ISO9001, 2008 SGS
Origin: Zhuzhou, China (Mainland)
HS Code: 8207909000
Carbide Turning and Boring Systems for Milling Machines
Â
Contact