The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements. PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com
non-asbestos Power equipment braking deceleration brake band/brake belt
Specifications
1.ISO9001:2008 verified
2.Green Products
3.Favorable price
4.Prompt delivery
5.Small Orders Accepted
BBH-Y Non asbestos Woven Resin Brake Lining in Roll
Color:As per your request
Thickness:5-30mm;
Width:≤500mm;
Length:10m 15m 20m, or as per your request
Material:Viscose fiber, glass fiber, copper wire, cashew resin
Work condition:200°C, Pressure:1.0 mpa
Standard:GB/T11834-2000
Application:Widely use in decelerating and braking of engineer machines, industry machine and mining machines.
Performance:Good elasticity, high tenacity, shock resisting, heat resisting, good duality and anastomosis, agile brake, etc.
We can manufacture the color, length and material as per your request
Wear Performance of Woven Resin Brake Lining in roll
Interface Temperature
Friction coefficient
Wear rate(CM3/NM)
100°C
040-0.65
≤0.7×10-7
150°C
0.35-0.65
≤1.1×10-7
200°C
0.30-0.60
≤1.3×10-7
Contact:
Tracy XieÂ
NINGBO XINYAN FRICTION MATERIAL CO.,LTD
CELL:008615257460937
Â
:8615257460937
Â
Â
Website:www.xynao.com
Â
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.