In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/ GYQ drilling rig is an upgraded and improved product of GXYdrilling rig. It mainly adds the winch detachment Gyq Drilling Rig,Gyq Survey Machine,Gyq Survey Rig,Spindle Core Drilling Rigs JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com
Nowadays, the use of CNC cutting machines has become very common. People are familiar with new technology products. Of course, the freshness of CNC cutting machines may be just a few days after they have just learned the machine. Familiar with the machine, whether it can operate the machine in accordance with the operating flow of the CNC cutting machine, it is not necessarily, so a long period of neglect will affect the service life of the CNC cutting machine, there are always security risks. Therefore, it is necessary to operate according to the flow of the CNC cutting machine. You may wish to take a look at the missing operation.
Before the machine is on the machine, we have to check the gas path, the valve is intact, there is no leakage phenomenon, whether the pressure of the valve reaches the cutting standard, the cutting nozzle on the flame cutting gun is installed, there is no Necessary to change, for CNC plasma cutting machine we have to check whether the plasma power supply gas path is intact, there is no leakage phenomenon. Whether the pressure reaches the standard, whether the plasma power supply is normal, whether there is an alarm phenomenon, and whether the plasma power supply ground wire is connected to the workpiece. Whether the electrode and cutting tip on the plasma torch are installed properly, there is no need to replace it. Of course after checking these. Before powering the machine, we must also look at the presence of obstacles on each track.
2 When working on the machine, we must first adjust the parallel of the steel plate and the track, and then select the model of the cutting nozzle according to the thickness of the plate, the cutting speed and the piercing time, or adjust the current of the plasma power supply. When the CNC flame cutting machine warms up, Avoid too much rust on the plate, it will affect the warm-up time and cutting efficiency of CNC flame cutting machine. During CNC plasma cutting, do not adjust the current of the plasma power supply too much; it will affect the service life of the plasma torch and the electrode. Then pay attention to whether the vertical between the torch and the plate, to avoid cutting the workpiece section slope, thus affecting the quality of processing. When the CNC cutting machine is working, if there is any abnormality, it is necessary to immediately stop the work or press the emergency stop switch, but avoid moving the machine and the plate.
3 After the completion of the work on the machine, after the work of the CNC cutting machine is completed, it is better to run the CNC cutting machine back to the origin, close the gas lines and power supply, and then clean up the waste. After the completion, clean the dust on the various tracks and bearings of the CNC cutting machine. . Clean the CNC cutting machine. The next time it is used for work, it will be clean and people will feel relaxed.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! 】
function structure, thereby extending the service life of the hoist. This drilling rig is a vertical transmission rotary drilling
rig with mechanical transmission and hydraulic feed. It can be applied to engineering geological survey, general survey of
solid deposits, grouting of dams and ventilation and drainage of tunnels. Depending on the drilling formation, cemented
carbide, steel grit, and auger types can be used for drilling.
Main Feature:
The structure of this rig has the following features:
1. A more reasonable speed range is selected. There are eight speed levels, centralized speed change, self-locking with
each other, large low-speed torque, and a wide range of use.
2. The drilling rig has two speeds of reversing speed, which is convenient for handling faults safely.
3. The self-centering hydraulic chuck is adopted, which is convenient for clamping and loosening the drill pipe. And has
a hydraulic feed mechanism, strong pressure and lifting capacity.
4. Equipped with sufficient instruments, it is helpful to grasp the situation in the hole, fewer operating handles, more
reasonable layout, flexible and reliable operation.
5. The two-plate normally closed friction clutch is adopted, which is flexible to open and close, and easy to adjust and use.
6. The rig is light in weight, compact in structure, easy to disassemble, and suitable for drilling work in hills or mountains.
7. The hoist has a detachment function. Increased the service life of the hoist.