Disposable Bouffant Cap Making Machine
KYD, founded in 1999, is a high-tech enterprise with all vilaty ,potential and comprehensive strength .Our Bouffant Cap Making Machine produces disposable nonwoven and PE bouffant caps which are widely used in hospital, travelling and hotel. Fully automatic from material feeding to finishing productions .One operator can run the whole line. It's made of aluminium alloy, and the machine can reach the speed of 60pcs/min. It uses the photoelectric detection and it's controlled by the frequency converter . The machine's power is 3.3 KW. We can make the machine according to the customer's detailed requirement. Only need to change the mold according to the specific product size. Disposable Bouffant Cap Making Machine Disposable Bouffant Cap Making Machine,Bouffant Cap Making Machine,Disposable Cap Making Machine KYD Automatic Mask Machine Factory , https://www.kydultrasonic.com
Product Overview: Boiling and drying, also known as fluidized bed, it is composed of air filter, heater, boiling bed host, cyclone separator, bag filter, high pressure centrifugal fan, operating table, due to the different nature of the drying materials, supporting Dust removal equipment, can be considered according to need, can choose the cyclone separator, bag filter, can also choose one of them.
Product description Boiling and drying, also known as fluidized bed, it is composed of air filter, heater, boiling bed host, cyclone separator, bag filter, high-pressure centrifugal fan, operating table, due to the different nature of the drying materials, supporting dust Equipment, can be considered according to need, can choose the cyclone separator, bag filter, also can choose one of them, generally speaking, the specific gravity such as granules and granules dry only need to choose cyclone separator, the proportion of lighter Small granular and powdery materials need to be equipped with bag filter, and pneumatic feeding device and belt conveyor are available for selection.
The bulk solid material is fed into the fluidized bed dryer by a feeder. The filtered clean air is heated and sent by the blower to the bottom of the fluidized bed and contacted with the solid material through the distribution plate to form a fluid-solid heat-mass exchange. After the material is dried, it is discharged from the discharge port. The exhaust gas is discharged from the top of the fluidized bed and discharged by the cyclone dust collector and the bag filter to recover the solid powder.
Steam, electric, hot air furnace can be equipped with (according to user requirements).
Working Principle Clean hot air is distributed into the bed through the valve plate. The wet material entering the feeder is boiled by hot air. Due to the extensive contact of hot air with the material, the process of heat and mass transfer is enhanced, so it can be dried in a short time. If the continuous type is adopted, the material enters from one end of the bed and is boiled and dried after tens of seconds to several minutes, and flows out from the other end of the bed automatically. This equipment is generally operated under negative pressure.
Adapt to materials â—Ž pharmaceuticals, chemical raw materials, food, food processing, feed drying operations. Such as: raw materials, tablets, granules, traditional Chinese medicine, health food, beverage granules, corn germ, feed, plastic resins, citric acid and other powdered materials dry dehumidification. Applicable material particle size is generally 0.1 ~ 6mm, the optimal particle size is 0.5 ~ 3mm.
Nowadays, XF series horizontal boiling dryers for drying equipment have been used in many fields. Many production workshops can not be separated from it. Today, Changzhou came to tell you about the introduction and working principle of XF series horizontal boiling dryer.