Shine offer Concrete Batching Plant operation and control, using Programmable Logic Controller and Supervisory Control and Data Acquisition system, so that manual problems can be solved to the biggest extent. We offer the complete system to design for full-automated Concrete Plant, with new aggregate weighing and batching algorithm implemented for adaptive flow rate and feeding speed control. In a fully automated system Concrete Batching operation can be completed within a few seconds which shows the time efficient and also the ingredients are weighed with help of load cell used and mixed in a given proportion automatically. Concrete Mix Plant Control Cabinet Concrete Mix Plant Control Cabinet,Mix Plant Control Cabinet,Concrete Plant Control Cabinet,Industrial Control Cabinet For Concrete Shandong Shenghuai Trading Co., Ltd. , https://www.shinebatchplant.com
It is reported that starting from January 1 next year, the latest version of the national mandatory standard GB7000.1-2015 "Lighting Part 1: General Requirements and Testing" will be implemented soon, one of the important ones is to increase the requirements for blue light hazards; housing and The Market Supervision Department of the Ministry of Urban and Rural Construction issued a letter on November 24, 2016 to solicit comments on the cancellation of eight engineering design special qualifications. In 2016, it will enter the last month of this year. In the past year, various changes in the LED industry have followed. Xiaobian today specifically explains for you some points worthy of attention in the near future: It is reported that starting from January 1 next year, the latest version of the national mandatory standard GB7000.1-2015 "Lighting Part 1: General Requirements and Testing" will be implemented, An important one is to increase the requirement for blue light hazard; the Market Supervision Department of the Ministry of Housing and Urban-Rural Development sent a letter on November 24, 2016 to solicit comments on the cancellation of eight engineering design special qualifications, including the proposed cancellation of special qualifications for lighting engineering design. Zhongke Hechuang (Beijing) Science and Technology Achievement Evaluation Center, according to the relevant provisions of the Ministry of Science and Technology "Scientific and Technical Evaluation Measures", after expert review, unanimously agreed to pass LE D lighting standard optical components research and implementation project scientific and technological achievements evaluation. The Connected Lighting Alliance (TCLA), a leading advocate of wireless lighting interconnect applications jointly established by Philips, GE Lighting, Lutron, OSRAM, Panasonic and Toshiba, has recently announced that the Alliance has achieved its goals and will soon be dissolved; According to the relevant personnel, the 13th Five-Year LED lighting industry development plan has been drafted and is seeking the opinions of relevant departments. New Year's Day implementation of the new national standard GB7000.1-2015 China Quality Certification Center issued a notice, the latest version of the national mandatory standard GB7000.1-2015 "lamps Part 1: General requirements and testing" will be implemented, since January 1, 2017 From the beginning, the center will implement the certification with the new version of the standard and issue a new version of the standard certification, no longer issue the old standard certification. For products that have been certified according to the old version of the standard, the application for conversion of the new version of the standard certificate should be submitted to the center before the end of the first follow-up inspection after the standard implementation date; all the old version of the standard certificate conversion work will be delayed by December 31, 2017. The day is completed, the deadline is not completed, the center will suspend the old standard certification. After the March 31, 2018, the conversion certificate has not been completed, and the center will revoke the old standard certification. It is understood that compared with the old version of the standard, the new version of the standard has been revised in many cases, one of which increases the requirements for blue light hazard, for example: for luminaires with integral LED or LED modules, according to IEC/TR62778 Blue light hazard assessment; for children with portable luminaires and nightlights, the blue light hazard level measured at a distance of 200mm must not exceed RG1; for portable luminaires and portable lights, if the blue light hazard level measured at a distance of 200mm exceeds RG1, you need to mark the symbol not to stare at the light source in the eye-catching position outside the fixture. For fixed luminaires, if the blue light hazard level measured at a distance of 200 mm exceeds RG1, then the critical distance of the luminaire just at RG1 needs to be determined experimentally. The Ministry of Housing and Urban-Rural Development plans to cancel the special qualification for lighting engineering design. The lighting engineering qualification threshold has always brought a lot of restrictions to the LED engineering lighting market. There are policy obstacles to the benign competition in the national municipal lighting engineering market and the introduction of more high-quality engineering enterprises to accelerate the survival of the fittest in the industry. The Market Supervision Department of the Ministry of Housing and Urban-Rural Development issued a letter on November 24, 2016 to solicit opinions on the cancellation of eight special qualifications for engineering design. The eight engineering design projects include: architectural decoration engineering, building intelligent system, building curtain wall engineering, light steel Structural engineering, lighting engineering, firefighting facility engineering, landscape architecture engineering and environmental engineering. It is understood that the State Council has previously decided to cancel 47 professional qualifications and recognition matters. It involves technical qualifications for lighting designers and neon makers. There are many hidden rules behind the project bidding. Due to the many aspects of engineering design, lighting lighting enterprises must face government officials, architectural designers, construction workers and interior design in order to win a project. In the bidding, we must take care of the relationship between the layers. This will inevitably lead to projects in which officials have extensively promoted the loss of labor and wealth for their personal achievements. Some people conduct table transactions in order to collect money. As a result, whether it is government procurement or engineering project construction projects, the collusion between government and business, through the arbitrary manipulation of bidding, resulting in false tendering, stringing and other corruption. Some insiders predict that according to the current market price, the construction company will maintain the cost of corporate and personal qualifications between 1 million and 2 million per year. If the opinions are implemented, the total burden of construction enterprises will exceed 10 billion. LED lighting standard optical component research and implementation project passed the national scientific and technological achievements evaluation on November 16th, Zhongke Hechuang (Beijing) Science and Technology Achievement Evaluation Center according to the relevant provisions of the Ministry of Science and Technology "Scientific and Technical Evaluation Measures", in accordance with third-party results evaluation standards and procedures In line with the principles of science, objectivity, independence and fairness, experts in the expert apartment of the Ministry of Science and Technology will jointly develop LED lighting standard light for the joint development of Foshan Nanhai District Guangdong New Light Source Industry Innovation Center and Dongguan Qinshang Optoelectronics Co., Ltd. The research and implementation projects of the components were evaluated for scientific and technological achievements. He Zhiming, researcher of the Torch Center of the Ministry of Science and Technology, Li Kuanan, professor-level senior engineer of China National Light Industry Association, Chang Yi, secretary general of Beijing Lighting Association, Zhao Wenqi, professor-level senior engineer of National Development and Reform Commission, Wang Xiaoying, professor-level senior engineer of Beijing Electric Light Source Society, and quality supervision of national electric light source Yang Zheng, a professor-level senior engineer at the inspection center, and Jin Shi, a researcher at the Science and Technology Development Center of the Ministry of Education, attended the meeting. After expert review, it is considered that the standard system preparation principle of the project meets the requirements, and the level setting is reasonable. It covers the upstream and downstream links of LED lighting products, realizes the modular design, and fills the domestic blank. The system is compatible with the international advanced level related system. At the same time, the project has obtained/applied a number of invention patents, utility model patents, and US patents. The standard system has been adopted by some enterprises, achieving better economic benefits and promoting the advancement of industry technology and product quality. The participating experts agreed to pass the evaluation of scientific and technological achievements. The United States Interconnected Lighting Alliance announced that its mission is about to be disbanded. In early years, the leading advocates of wireless lighting interconnection applications jointly established by the six lighting industry giants Philips, GE Lighting, Lutron, Osram, Panasonic and Toshiba have recently announced that the Alliance Lighting Alliance (TCLA) has recently announced that the alliance The goal has been achieved to enable the lighting industry to support the adoption of open protocols in wireless lighting solutions. After examining various open protocols, the Connected Lighting Alliance now supports ZigBee 3.0 as an open standard for consumer applications and has designated ThreadGroup to develop network layer protocols for indoor professional lighting applications. As a result, members of the Connected Lighting Alliance agreed to disband the organization by December 31, 2016. Their work and vision for interoperable wireless lighting solutions will continue to be completed by the ZigBee Alliance, ThreadGroup and Fairhair Alliance, a partner organization of the Connected Lighting Alliance. It is said that at the beginning of the establishment of the Connected Lighting Alliance, consumers and users are facing the chaos of wireless lighting interconnection standards and feel overwhelmed. This phenomenon seriously threatens the development of this young market. The Connected Lighting Alliance aims to bring together leading companies in the lighting industry to develop technical market requirements for wireless lighting applications and to determine which key organization recommendations are adopted. The Connected Lighting Alliance is a very effective platform to help the lighting industry support the development of the connected lighting market. Now it has completed its main mission, and the event is time to stop, so that its members can focus on new challenges. The Connected Lighting Alliance plays an indispensable role in the connected lighting market, representing a consistent voice in the lighting industry in a complex and diverse world of connected standards. EU releases draft implementation measures for eco-design regulations for lighting products It is reported that the 2009/125/EC Directive requires the Commission to develop relevant eco-design requirements for controlling the performance of energy-related products related to trade or sales in the market, through improved design performance. Reduce energy consumption while reducing the impact of energy consumption on the environment. The Directive Committee is required to develop a preparatory plan for the analysis and research of environmental impacts, technical requirements and economic benefits of existing lighting products and components. This technical regulation is based on the development and enhancement of existing implementation measures ECNo244/2009, ECNo245/2009, and EUNo1194/2012. This enforcement measure applies to lighting products or lighting product components that are marketed or put into use, including lighting devices that are incorporated into other products. However, the following lighting products are not within the scope of the products used for this implementation: military or civil defense equipment and installations; nuclear installations; transportation equipment other than automobiles; road, rail, sea or airborne signaling devices; medical device devices; Room equipment; electronic display; art gallery; product working environment temperature below -20 ° C or above 50 ° C. The implementation measures will take effect on the 20th day after the official publication of the official gazette and will be enforced on September 1, 2018, together with the Commission Regulation (EC) No 244/2009; Commission Regulation (EC) No 245/2009; Commission Implementation measures such as Regulation (EU) No 1194/2012 will be abolished. The 13th Five-Year LED Lighting Industry Development Plan or released on the 15th of this month, Ren Shuben, Director of the Environment and Development Department of the National Development and Reform Commission, will focus on promoting top-level design, promoting core technologies, high-end product development and industrialization, and guiding LED lighting companies to carry out International capacity cooperation, driving domestic LED products and technology to go out and other work. He said that since the 12th Five-Year Plan, China has adopted a series of measures to continuously promote the green transformation of the lighting industry. The 13th Five-Year Plan is a crucial period for the development of China's semiconductor lighting industry. The National Development and Reform Commission will promote the improvement of relevant policies and strengthen macro guidance. It is said that the 13th Five-Year LED lighting industry development plan has been drafted and is seeking the opinions of relevant departments, and strives to release it before the year. The plan clarifies development goals, major tasks and key projects, and will further optimize and improve the market environment and policy environment of the LED lighting industry. A new round of scientific and technological revolution and industrial transformation are creating new opportunities for history. The development environment and conditions at home and abroad are undergoing profound changes. According to estimates, the overall output value of China's semiconductor lighting industry will reach 1 trillion yuan in 2020, of which the market share of LED lighting products can reach 60%.