BRY air-cooled centrifugal heat transfer oil pump maintenance should pay attention to ten aspects .1. After using the vacuum oven, be sure to do a clean job, clean the vacuum oven glass. 2. Wipe the exterior anti-rust oil. 3. Eliminate the governor cavity, spray smooth BRY air-cooled centrifugal oil heat pump cavity anti-rust oil, to participate in the rules of the trademark of smooth oil. 4. The anti-rust oil in the fuel pipeline should also be removed before use. Connect the fuel to the micro-pipeline, and move to change the jet camshaft from time to time until the oil valve is tightly closed to emit clean fuel. 5 fuel selection is reasonable. 6 must be marked with the appropriate fuel. Ordinary Yan days use No. 0 diesel fuel, winter use -10 light diesel oil. 7. The fuel used must be clean and contain no impurities or moisture 8. Water will erode the BRY air-cooled centrifugal heat transfer oil pump, so water-containing substances should be prevented from pumping with a BRY air-cooled centrifugal heat transfer oil pump. Use a water pump in Room 1210 to evacuate. 9. Contains a lot of solvent material First in the oven to remove most of the solvent, and then use vacuum. 10. The exact number of the first use of vacuum pumps to avoid the phenomenon of inverted suction.
Main Model no. : SC100, SC100/100, SC150, SC150/150, SC200 and SC200/200
3m length cage, maximum 250m lifting height, 2tons/4tons capacity, can lift material and people, with operation room
Both twins cage and single cage are available.
Introduction for SC200/200 Construction Lift Elevator/ Buidling Hoist/ Construction Passenger Hoistadopted computer aided design. Comparing with traditional building hoists, it is attractive, light, easy to handle, secure, applicable, and popular. Depending on special needs of regular or irregular sections, the lifting capacity can reach up to 1~2 tons, and the running speed can reach 28~38m/min. Moreover, VVVF speed regulation and PLC enable 0~68 limitless speed, automatic layer selecting and leveling as required. SC200/200 Building Hoist is excellent in technical performance, more secure in operating mechanism, and more compact in structure.
This style construction elevator:
1,Adopts computer aided design
2,Light, easty to operate
3,Lifting capacity can reach up to 4tons
4,Running speed can reach 28 to 38m/min
5,use VVVF speed regulation enable 0 to 68m/min range-optional
6, PLC, provide automatic layer selecting and leveling as required-optional
7,Anti-corrosion treatment for the internal and external mast
Construction Hoist,Building Hoist,Mobile Crane,Construction Lift Miliscorp Industry Ltd , https://www.mctowercrane.com
ã€Print】 ã€Close】